We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
1/2" drive Socket for Sea-Doo 215/230/255/260/300 horsepower Impeller Spline Tool WR012.
Can't find a socket wrench big enough to fit the giant hex on the WR012 impeller tool? Look no further. This 36mm socket has a 1/2" drive side to handle your stocky torque wrench so you can get the impeller tightened just right!
Size- 36mm
Material- Chrome Vanadium Steel
Finish Type- Painted
This socket fits the hex end of the popular WR012 impeller tool used on the 215hp and higher Sea-Doo models of PWC and boats. It does NOT remove /install impellers by itself. You will also need the WR012 impeller tool, and a 1/2" drive wrench.
Please see the guide below to help make sure you get the correct tool for your craft. Or check your parts book or contact us for help getting the right tool for your pump/impeller.
SKU | 36mm12 |
---|---|
Engine CC | 1494, 1630, 1500, 1503 |
Year | 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 |
Sea Doo Model | GTX 215, GTX IS 215, GTX IS 255, GTX LTD IS 260, GTX LTD SC, GTX Wake SC, RXP 215, RXP-X, RXT 215, RXT IS 260, RXT-X, RXT-X 260, GTX LIMITED 300, GTX-230, GTR-230, GTR-X 230, WAKE PRO 230hp, RXT-X 300, RXT-X aS260, RXT iS 260, RXT-X 260, RXT 260, RXT-230, RXT (215hp), GTX LTD iS255, GTX LTD iS260, RXP-X 300, RXP-X 260, RXP-X 255, RXP (215hp), WAKE PRO (215hp), WAKE PRO (230hp), GTX LTD 215, Islandia, Utopia 205, Speedster 160 |