We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Sea-Doo RXP/RXT/4-tec Pump Shaft Hex Tool (WR011H)
$14.99
Use with the WR012 or WR011 impeller tools to remove impellers from the pump shaft on 2004-2008 PWC, and 2002-2010 on some jet boat models.
This tool holds the impeller/pump shaft of pumps that have the female hex on the end of the shaft
WR011H is 1/2" drive
Availability:
In stock
SKU
WR011H
The WR011H Sea-Doo impeller/pump shaft hex tool fits into the female hex slot in the "SRX Style" impeller/pump shaft to hold it while you tighten/loosen the impeller from the shaft. It is designed to be used with a 1/2" drive wrench/breaker bar.
This tool fits into 2002 through 2008 "SRX Style" Sea-Doo pumps used in the 4-stroke model PWC. Sea-Doo continued use of that hex style shaft until 2010 on some of the Jet Boat models.
Please verify whether you have the "SRX Style" female hex impeller/pump shaft, or the newer 2009-current "SRZ Style" threaded/nut design of impeller/pump shaft before ordering. If you have the newer "SRZ Style" threaded/nut design shaft, then you do not need a holding tool at all.
Use this tool with the WR011 or WR012 to remove/install the impeller from the shaft.
Please check your pump, parts book, or contact us for help getting the right tool for your pump/impeller. Please see the chart below to help identify which styler of pump/impeller that you have.
| SKU | WR011H |
|---|---|
| Engine CC | 1494 |
| Year | 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 |
| Sea Doo Model | GTi 130, GTi LE, GTi RFI LE, GTi SE, GTi SE 130, GTi SE 155, GTX 155, GTX 215, GTX 4tec, GTX 4tec SC, GTX 4tec Wake, GTX IS 215, GTX IS 255, GTX LTD, GTX LTD SC, GTX SC, GTX Wake SC, RXP 155, RXP 215, RXP-X, RXT 215, RXT-X, Islandia, Utopia 205, Utopia 185, Challenger 1800, Speedster 160 |
| Accessory Manufacture | Solas |
Write Your Own Review
