We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Yamaha WR003H Driveshaft Holding tool for Waverunner/wavejammer 500 and 650 LX Yamaha that use the 16mm driveshaft
This tool makes removal/installation of an impeller so much easier! Simply insert the tool into a vice (or hold it with a large wrench), and insert the driveshaft into it. Now you can turn the impeller and unthread it from the shaft while keeping the shaft from spinning. It's a lifesaver
Please check our fitment guide below to see if this tool fits your driveshaft
The WR003H driveshaft holding tool fits onto the end of the Yamaha driveshaft within the pump of the WaveRunner 500, WaveJammer 500 and 650LX PWC.
The WR003H tool is used to hold the shaft while tightening/loosening ANY impeller from the shaft.
We also suggest buying the WR003 for Solas impellers to remove/install the impeller from the shaft while the WR003H holds the shaft in place. If you have a Skat Trak impeller, it has a hex nut built into the end of the impeller, so only a standard adjustable wrench is needed.
See our fitment guide below for help determining if this tool fits your shaft
SKU | WR003H |
---|---|
Engine CC | 500, 650 |
Yamaha Model | LX 650, Wave Jammer 500, Wave Runner 500 |
Year | 1987, 1988, 1989, 1990, 1991 |
Accessory Manufacture | Solas |