We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
WR014H Driveshaft Holding Tool
$19.95
Solas Yamaha WR014H Driveshaft Holding tool for most 1800cc Yamaha skis that use the larger 25mm driveshaft
This tool makes removal/installation of an impeller so much easier! Simply insert the tool into a vice (or hold it with a large wrench), and insert the driveshaft into it. Now you can turn the impeller and unthread it from the shaft while keeping the shaft from spinning. It's a lifesaver
Please check our fitment guide below to see if this tool fits your driveshaft
Availability:
In stock
SKU
WR014H
The Solas WR014H driveshaft holding tool fits onto the end of the Yamaha driveshaft within the pump of the 155mm pumps with the 25mm driveshaft.
Use this tool to hold the shaft while tightening/loosening the impeller from the shaft
We also suggest buying the WR014 for Solas impellers, or the Skat-Trak SYT25 impeller tool to remove/install the impeller to/from the shaft. If you have an OEM Yamaha impeller, you only need this WR014H tool, as the stock impellers use a hex nose to grab onto with a large closed end wrench
Please see our fitment guide below to see if this tool fits your shaft
| SKU | WR014H |
|---|---|
| Engine CC | 1812 |
| Yamaha Model | FX Cruiser SHO, FX SHO, FZR, FZS, FX SVHO, FX Cruiser SVHO, FX Limited SVHO, VX Limited/VX Cruiser/VX Deluxe/VX |
| Year | 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 |
| Accessory Manufacture | Solas |
Write Your Own Review
