We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
WR007H Driveshaft Holding Tool
$13.99
Solas Yamaha WR007H Driveshaft Holding tool for most 800cc, 1049cc, and some 1200cc Yamaha skis and Jet boats that use the 22mm driveshaft
This tool makes removal/installation of an impeller so much easier! Simply insert the tool into a vice (or hold it with a large wrench), and insert the driveshaft into it. Now you can turn the impeller and unthread it from the shaft while keeping the shaft from spinning. It's a lifesaver
Please check our fitment guide below to see if this tool fits your driveshaft
Availability:
In stock
SKU
WR007H
The WR007H driveshaft holding tool fits onto the end of the Yamaha driveshaft within the pump of many 144mm and 155mm pumps with the 22mm driveshaft.
This size shaft is commonly used on the Yamaha XLT, GPR, FX 140, EX-R, VX-C, V1, 2016 and newer VX cruiser/limited/deluxe, and similar models made since 1999. This tool also fits the driveshaft of countless Yamaha Jet boats with the 1049/1100cc engines like the AR210, SX 230 and more.
The WR007H tool is used to hold the shaft while tightening/loosening ANY impeller from the shaft.
We also suggest buying the WR007 for Solas impellers, or the Skat-Trak SYT22 impeller tool to remove/install the impeller to/from the shaft.
See our fitment guide below for help determining if this tool fits your shaft
| SKU | WR007H |
|---|---|
| Engine CC | 1200, 1300, 800 |
| Yamaha Model | FX Cruiser, FX Cruiser HO, FX HO, FX/FX 140, GP 1200R, GP 1300R, GP 800R, SUV 1200, XLT 1200, XLT 800 |
| Year | 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 |
| Accessory Manufacture | Solas |
Write Your Own Review
