We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Solas Yamaha WR004H Driveshaft Holding tool for most 650, 701, 760, 800 and some 1100cc Yamaha skis that use the 20mm driveshaft
This tool makes removal/installation of an impeller so much easier! Simply insert the tool into a vice (or hold it with a large wrench), and insert the driveshaft into it. Now you can turn the impeller and unthread it from the shaft while keeping the shaft from spinning. It's a lifesaver
Please check our fitment guide below to see if this tool fits your driveshaft
The Solas WR004H driveshaft holding tool fits onto the end of the Yamaha driveshaft within the pump of most FX-1 standup, 144mm and some 155mm pumps.
Use this tool to hold the shaft while tightening/loosening the impeller from the shaft
We also suggest buying the WR004 impeller tool for Solas impellers, or the Skat-Trak SYT20 impeller tool to remove/install the impeller to/from the shaft. If you have an OEM Yamaha impeller, you only need this WR014H tool, as the stock impellers use a hex nose to grab onto with a large closed end wrench
Please see our fitment guide below to see if this tool fits your shaft
SKU | WR004H |
---|---|
Engine CC | 1100, 1200, 760, 800 |
Yamaha Model | FX-1, GP 1200, GP 760, GP 800, Super Jet, Wave Blaster, Wave Blaster 2, Wave Raider 700/Deluxe/760, Wave Runner 3/GP, Wave Venture 1100, Wave Venture 700, Wave Venture 760, Wave Raider 1100, XL 1200, XL 700, XL 760 |
Year | 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 |
Accessory Manufacture | Solas |